VSP860 Rotary Polisher Support
EN | DE | FR | ES | IT | PT | NL | SW | PL | CZ | TR
VARIABLE SPEED POLISHER
Compact Polisher User Guide
How To Use VSP860 Rotary Polisher
Fit The Handle
Screw in the handle to the left or right side.
Attach Backing Pad
Screw in the backing pad clockwise.
Remove Backing Pad
Use the wrench to unscrew anticlockwise.
Set Speed
Set the dial to speed setting you require.
Turn On and Off
Use the on and off switch to turn on and off.
Changing Carbon Brushes
Unplug and open carbon brushes housing.
Polisher Operting Tips
✅ Always check the polisher and accessories before use for damage or missing parts.
✅ Make sure the on/off switch is in the OFF position before plugging in.
✅ Use moderate pressure during polishing. Do not press too hard to avoid overheating.
✅ Adjust the speed dial as needed. Use lower speeds to start and increase gradually.
✅ Never polish while carrying the polisher or until it comes to a complete stop.
✅ Keep hands, hair, and loose clothing away from moving parts during operation.
✅ If the polisher becomes hot, stop and allow it to cool before continuing.
✅ Replace carbon brushes when worn. Use only original replacement parts.
✅ Store the polisher safely after use and keep out of reach of children.
Frequently Asked Questions
How much pressure should I use when polishing?
Apply moderate pressure only. Pressing too hard can slow down the polisher, reduce performance, and may cause overheating or damage.
What speed should I use when polishing?
Start polishing at a low speed and gradually increase as needed. Avoid using high speeds at the beginning to prevent splatter and loss of control.
What should I do if the polisher becomes hot during use?
Stop polishing immediately and allow the polisher to cool down. Continuous use when hot may cause damage or reduce the life of the tool.
How do I know when to change the carbon brushes?
The polisher will automatically stop when the brushes are worn out. Replace them with original parts before using the polisher again.
How should I store the polisher after use?
Clean the polisher and store it in a dry, safe place, away from children. Make sure the backing pad has stopped rotating before putting it down.
Products Used With VSP860 Rotary Polisher
GP-PRO Felt Polishing Pads 75mm (3")
GP-PRO Felt Polishing Pads 130mm (5")
GlasX™120 - P180 Coarse Mesh Abrasives 75mm (3")
GlasX™60 - P500 Fine Mesh Abrasives 125mm (5")
